DSPIC30F3011-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3011 |
| Pin Count | 44 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 192 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3011-30I/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. Mounted using Surface Mount. There is a Tray package available for it. With a processor of dsPIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. It has a type of program memory of FLASH. 30 I/Os can be found on it. To find comparable components, use the DSPIC30F3011 base part number. The terminals of this device are located at QUAD. In this case, there are 44 terminationals. The dsPIC? 30F series includes this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. For its construction, 44 pins are used. As a result, it is mounted in accordance with Surface Mount. It is equipped with 44 pins in total. It falls under the category of Digital Signal Processors. The devices have a memory size of 24kB that can be used to store programs and data. This device achieves excellent efficiency at frequencies of 30MHz. 5 timer/counters are present. There is an oscillator type Internal used in this circuit.
DSPIC30F3011-30I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3011-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F3011-30I/PT Microcontroller applications.
- Hard drives
- Fax machines
- Ipad
- Electrocardiogram (EKG)
- Robotic prosthetic limbs
- Vacuum cleaners
- Magnetic resonance imaging (MRI)
- X-ray
- Dryers
- Nintendo
