DSPIC30F3011T-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3011 |
| Pin Count | 44 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| Speed | 20 MHz |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3011T-30I/PT Overview
As a result, it is available in the 44-TQFP package. Mounted using Surface Mount. This item can be found in package Tape & Reel (TR). Device with dsPIC core processor issupported. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. A total of 30 I/Os are present. It has a base part number of DSPIC30F3011 that can be used to find other components that are comparable. The position of the device is QUAD at terminal. It has 44 terminationals. The dsPIC? 30F series contains this electrical component. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 44 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. It is equipped with 44 pins in total. It is one of the components included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 24kB. When working at a frequency of 30MHz it is able to achieve excellent efficiency. A total of 5 timers/counters have been set up. There is an oscillator type Internal used in this circuit.
DSPIC30F3011T-30I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3011T-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F3011T-30I/PT Microcontroller applications.
- Petrochemical
- Speed meter
- Automatic staplers
- Washing machines
- Missile control
- Playstation
- Entertainment products
- Hard drives
- Printers
- Monitoring-temperature level, oil level, speed, distance, acceleration
