DSPIC30F3012-20E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F3012 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 2048 |
| Length | 22.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3012-20E/P Overview
A space-saving advantage is that it is included in the 18-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. It is available in the Tube package. A core processor of dsPIC is present in the device. When working, the temperature should be kept at -40°C~125°C TA. Its type of program memory is FLASH. 12 I/Os can be found on it. It has a base part number of DSPIC30F3012 that can be used to find other components that are comparable. At DUAL, it has its terminals. As far as terminations are concerned, there are 18 terminations present. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. The supply voltage of 5V allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 18 pins are used to construct it. The method of Through Hole is used to mount it. There are a total of 18 pins on it. It is one of the components included in Digital Signal Processors. In order to store data and programs, the devices have a memory size of 24kB. Using a frequency of 20MHz, it is very efficient. 3 timers/counters are in use. A supply voltage (Vsup) above 4.5V is necessary for normal operation. It works with an oscillator type Internal.
DSPIC30F3012-20E/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3012-20E/P Applications
There are a lot of Microchip Technology DSPIC30F3012-20E/P Microcontroller applications.
- Hand-held metering systems
- Fax machines
- Aerospace navigation systems
- Electromechanical control
- Refrigerators
- Measuring revolving objects
- Wastewater treatment
- Electrocardiogram (EKG)
- Current meter
- Accu-check
