DSPIC30F3012-20I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F3012 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 192 kb |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| Number of ADC Channels | 8 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC30F3012-20I/P Overview
A space-saving advantage is that it is included in the 18-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. It comes in a Tube package. There is a dsPIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. There are 12 I/Os on the board. A component with the same part number as DSPIC30F3012 can be compared to other similar components. DUAL is the position of its terminals on the board. It has 18 terminationals. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 5V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 18 pins are used in its construction. A method of mounting is used, which is Through Hole. On it, there are 18 pins. It is one of the components included in Digital Signal Processors. A device with a memory size of 24kB can store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. In total, there are 3 timers and counters. There is also a property of ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ on it. The oscillator type Internal is used to operate the device.
DSPIC30F3012-20I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3012-20I/P Applications
There are a lot of Microchip Technology DSPIC30F3012-20I/P Microcontroller applications.
- Fabric
- Hard drives
- Mobile computers
- Coffee machines
- Process control devices
- Home video and audio
- Hand-held metering systems
- Smoke alarms
- Computers and laptops-video calling, email, blogging
- Measuring revolving objects
