DSPIC30F3012-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3012 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 192 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3012-20I/SO Overview
To save space, it is included in the 18-SOIC (0.295, 7.50mm Width) package. Mounted using Surface Mount. In the package Tube, it is included. Devices with dsPIC core processors are available. When working, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 12 I/Os on the board. A component with the same part number as DSPIC30F3012 can be compared to other similar components. At DUAL, its terminals are located. It consists of 18 terminationals. It is a member of the dsPIC? 30F series of electrical components. High efficiency is possible due to the 5V supply voltage. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 18 pins are used to construct it. As a result, it is mounted in accordance with Surface Mount. There are a total of 18 pins on it. This component is a part of Digital Signal Processors. A device with a memory size of 24kB can store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. 3 timers/counters are in use. Normally, the supply voltage (Vsup) should remain above 4.5V. There is an oscillator type Internal used in this circuit.
DSPIC30F3012-20I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3012-20I/SO Applications
There are a lot of Microchip Technology DSPIC30F3012-20I/SO Microcontroller applications.
- Television
- Robots
- Refrigerators
- Hearing aids
- Dialysis machines (performs function of liver)
- Accu-check
- Process control devices
- Industrial instrumentation devices
- Coffee machines
- Smart highways (navigation, traffic control, information monitoring and car service)
