DSPIC30F3013-20E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F3013 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 1K x 8 |
| Number of Programmable I/O | 30 |
| Format | FIXED-POINT |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3013-20E/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. It comes in a Tube package. There is a dsPIC as core processor in this device. During work, the temperature should remain at -40°C~125°C TA. Its type of program memory is FLASH. 20 I/Os are present on the device. In order to find similar components, it has a base part number of DSPIC30F3013. At DUAL, it has its terminals. Currently, it consists of 28 terminationals. In the dsPIC? 30F series, this electrical component is found. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 28 pins are used in its construction. According to Through Hole, it is mounted. It is equipped with 28 pins in total. It is one of the components included in Digital Signal Processors. The devices have a memory size of 24kB that can be used to store programs and data. Using a frequency of 20MHz, it is very efficient. There are 3 timers/counters. There are a total of 30 programmable I/Os available. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. An oscillator of type Internal is used.
DSPIC30F3013-20E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3013-20E/SP Applications
There are a lot of Microchip Technology DSPIC30F3013-20E/SP Microcontroller applications.
- Calculator
- Paper shredders
- Vacuum cleaners
- Sonography (Ultrasound imaging)
- Air fryers
- Current meter
- Glucose monitoring systems (for Type 1 Diabetes)
- Smartphone
- Computer/laptop
- Smart highways (navigation, traffic control, information monitoring and car service)
