DSPIC30F3013-20I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3013 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 30 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3013-20I/ML Overview
Due to the benefits of saving space, it is available in the 44-VQFN Exposed Pad package. This is mounted using the Surface Mount method. There is a Tube package available for it. Device with dsPIC core processor issupported. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 20 I/Os on the board. Other components that are comparable to it have the base part number DSPIC30F3013. At QUAD, it has its terminals. 44 terminationals are present. It is a member of the dsPIC? 30F series of electrical components. Using the 5V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. The structure is constructed from 44 pins. This mount is done in accordance with the method of Surface Mount. Total number of pins is 44. This component is a part of Digital Signal Processors. Memory size for the devices is 24kB, which can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. There are currently 3 timers/counters set up on the system. A chip with 30 programmable inputs/outputs is available. The property of ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ is also possessed by it. A supply voltage (Vsup) above 4.5V is necessary for normal operation. An oscillator of type Internal is used.
DSPIC30F3013-20I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3013-20I/ML Applications
There are a lot of Microchip Technology DSPIC30F3013-20I/ML Microcontroller applications.
- ECG machine
- DDC control
- Telephone sets
- Broadband technology, video and voice processing
- Electronic jamming systems
- Set-top boxes
- Robotic prosthetic limbs
- Traditional industrial transformation
- Automatic control
- Microwave ovens
