DSPIC30F3013-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3013 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 30 |
| Format | FIXED-POINT |
| Height Seated (Max) | 2.64mm |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3013-20I/SO Overview
There is an option to purchase it in the 28-SOIC (0.295, 7.50mm Width) package, which saves space. This is mounted using the Surface Mount method. This item can be found in package Tube. Device with dsPIC core processor issupported. When working, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 20 I/Os are present. Other components that are comparable to it have the base part number DSPIC30F3013. At DUAL, it has its terminals. There are a total of 28 terminations in it. dsPIC? 30F is the series number of this electrical component. High efficiency is possible due to the 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 28 pins are used to construct it. According to Surface Mount, it is mounted. It is equipped with 28 pins in total. It falls under the category of Digital Signal Processors. The devices have a maximum memory size of 24kB that can be used to store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. The number of timers and counters is 3. A chip with 30 programmable inputs/outputs is available. ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ also belongs to it. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. There is an oscillator type Internal used in this circuit.
DSPIC30F3013-20I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3013-20I/SO Applications
There are a lot of Microchip Technology DSPIC30F3013-20I/SO Microcontroller applications.
- Pacemakers (used to control abnormal heart rhythm)
- Walkie talkies
- Oscilloscopes
- Blenders
- Keyboards
- Entertainment-radios, CD players, televisions
- Medical instruments chromatographs
- Telephone sets
- Fire detection & safety devices
- Hand-held metering systems
