DSPIC30F3013-20I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F3013 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 30 |
| Format | FIXED-POINT |
| Height Seated (Max) | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3013-20I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. Package Tube contains it. dsPIC core processor is present on the device. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. A total of 20 I/Os are available on this device. It has a part number of DSPIC30F3013 that can be used to locate similar components. The terminals of this device are set to DUAL. It has 28 terminationals. In the dsPIC? 30F series, this electrical component is found. The supply voltage of 5V allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. For its construction, 28 pins are used. Based on the Through Hole method, it is mounted. Total number of pins is 28. The component is included in Digital Signal Processors. The devices have a maximum memory size of 24kB that can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 3 timer/counters are present. There are 30 programmable I/Os in the device. There is also the property of ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ. Normally, the supply voltage (Vsup) should remain above 4.5V. An oscillator of type Internal is used.
DSPIC30F3013-20I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3013-20I/SP Applications
There are a lot of Microchip Technology DSPIC30F3013-20I/SP Microcontroller applications.
- ECG machine
- Smartphones-calling, video calling, texting, email
- Instrument control
- Dishwashers
- Digital set-top boxes
- Walkie talkies
- Current meter
- Printers
- Hand-held metering systems
- Temperature sensing and controlling devices
