DSPIC30F3013-30I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3013 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| EEPROM Size | 1K x 8 |
| Number of Programmable I/O | 30 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F3013-30I/ML Overview
For the purpose of saving space, it is available in the 44-VQFN Exposed Pad package. The way of Surface Mount is used to mount it. It comes in a Tube package. The device runs in dsPIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of FLASH. A total of 20 I/Os are available on this device. Based on its base part number of DSPIC30F3013, other similarly-sized components can be found. QUAD is the position of its terminals on the board. It consists of 44 terminationals. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 44 pins are required to construct this device. Based on the Surface Mount method, it is mounted. A total of 44 pins are attached to it. This is a component included in Digital Signal Processors. In the device, there is a memory capacity of 24kB which may be used to store programs and data. This device achieves excellent efficiency at frequencies of 30MHz. There are 3 timers/counters. A chip with 30 programmable inputs/outputs is available. In order to maintain normal operation, Vsup must be above 4.5V. The oscillator type Internal is used to operate the device.
DSPIC30F3013-30I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3013-30I/ML Applications
There are a lot of Microchip Technology DSPIC30F3013-30I/ML Microcontroller applications.
- Torpedo guidance
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Process control devices
- Computed Tomography (CT scan)
- Ipad
- Answering machines
- Coffee machines
- 3D printers
- Mobile computers
- Removable disks
