DSPIC30F3013-30I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 30MHz |
| Base Part Number | DSPIC30F3013 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| Nominal Supply Current | 37mA |
| Speed | 30 MIPs |
| RAM Size | 2K x 8 |
| Memory Type | FLASH |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16b |
| Density | 192 kb |
| Core Architecture | dsPIC |
| EEPROM Size | 1K x 8 |
| Max Frequency | 30MHz |
| Number of Programmable I/O | 30 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 1 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3013-30I/SO Overview
Due to the benefits of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. The way of mounting it is Surface Mount. It comes in a Tube package. With a processor of dsPIC cores, the device is powered. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. There are 20 I/Os on it, which makes it a very simple device. Based on the DSPIC30F3013 base part number, it can be compared with other components. An electrical component such as this is included in the series dsPIC? 30F. For data storage, FLASH is used as its memory type. The structure is constructed from 28 pins. Mounting is performed in accordance with Surface Mount. Memory size for the devices is 24kB, which can be used to store programs and data. In terms of architecture, it is based on dsPIC. It performs extremely well at a frequency of 30MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 3 timers/counters have been set up. Maximum frequency is 30MHz. It is recommended that the operating temperature be below 85°C. Ideally, the working temperature should exceed -40°C. 30 is the number of programmable I/O. Using an oscillator type Internal, it operates.
DSPIC30F3013-30I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Minimum temperature of -40°C
DSPIC30F3013-30I/SO Applications
There are a lot of Microchip Technology DSPIC30F3013-30I/SO Microcontroller applications.
- DCS control intelligent sensor
- Electronic jamming systems
- Security systems
- Oscilloscopes
- Communication-bluetooth, Wi-Fi, radio
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Fire detection & safety devices
- Calculator
- Entertainment products
- Heater/Fan
