DSPIC30F3013T-30I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3013 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 30 |
| Format | FIXED-POINT |
| Height Seated (Max) | 2.64mm |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3013T-30I/SO Overview
For space savings, it is available in the 28-SOIC (0.295, 7.50mm Width) package. A Surface Mount mounting method is used. In the package Tape & Reel (TR), it is included. With a processor of dsPIC cores, the device is powered. When working, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of FLASH. It has a number of 20I/Os. Other components that are comparable to it have the base part number DSPIC30F3013. The terminals of this device are set to DUAL. In this case, there are 28 terminationals. The dsPIC? 30F series includes this electrical component. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 28 pins. The mounting of this device is carried out following the method of Surface Mount. In total, it has 28 pins. In the subcategory of Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 24kB. This device achieves excellent efficiency at frequencies of 30MHz. There are currently 3 timers/counters set up on the system. There are 30 programmable I/Os in the device. Moreover, it also has the property of ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10MHZ. A supply voltage (Vsup) above 4.5V is necessary for normal operation. An oscillator type Internal is required for it to work.
DSPIC30F3013T-30I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3013T-30I/SO Applications
There are a lot of Microchip Technology DSPIC30F3013T-30I/SO Microcontroller applications.
- DDC control
- Smartphone
- Microwave ovens
- Food and beverage
- Fire detection & safety devices
- Equipment control
- Virtual reality VR robots
- Information appliances (networking of household appliances)
- Ipad
- Light sensing & controlling devices
