DSPIC30F3014-20E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F3014 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Length | 52.26mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DSPIC30F3014-20E/P Overview
A space-saving advantage is that it is included in the 40-DIP (0.600, 15.24mm) package. Mounted using Through Hole. This item can be found in package Tube. A dsPIC core processor powers the device. Work should be performed at a temperature of -40°C~125°C TA. In terms of its program memory type, it is FLASH. A total of 30 I/Os are present. To find comparable components, use the DSPIC30F3014 base part number. The terminals are positioned at DUAL. As far as terminations are concerned, there are 40 terminations present. An electrical component such as this is included in the series dsPIC? 30F. The 5V supply voltage enables high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 40 pins are used to construct it. According to Through Hole, it is mounted. It is equipped with 40 pins in total. Digital Signal Processors contains this component. In the device, there is a memory capacity of 24kB which may be used to store programs and data. Working at a frequency of 20MHz results in excellent efficiency. 3 timer/counters are present. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. Using an oscillator type of Internal, it works.
DSPIC30F3014-20E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3014-20E/P Applications
There are a lot of Microchip Technology DSPIC30F3014-20E/P Microcontroller applications.
- Measuring revolving objects
- DVD\DV\MP3 players
- Food and beverage
- Xbox
- Fax machines
- Virtual reality VR robots
- Graphic terminals
- Routers
- Air fryers
- Automatic staplers
