DSPIC30F3014-20I/P
| Parameters | |
|---|---|
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 192 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Number of SPI Channels | 1 |
| Height | 4.9mm |
| Length | 53.2mm |
| Width | 14.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F3014 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
DSPIC30F3014-20I/P Overview
For space savings, it is available in the 40-DIP (0.600, 15.24mm) package. This is mounted using the Through Hole method. It is available in the Tube package. A dsPIC core processor powers the device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. 30 I/Os are present on the device. It has a base part number of DSPIC30F3014 that can be used to find other components that are comparable. This device has terminals at DUAL. Currently, it consists of 40 terminationals. The dsPIC? 30F series contains this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. The structure is constructed from 40 pins. This mount is done in accordance with the method of Through Hole. In total, it has 40 pins. This component is a part of Digital Signal Processors. In order to store data and programs, the devices have a memory size of 24kB. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 3 counters/timers are currently active. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. The oscillator type Internal is used to operate the device.
DSPIC30F3014-20I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3014-20I/P Applications
There are a lot of Microchip Technology DSPIC30F3014-20I/P Microcontroller applications.
- Digital cameras
- Sonography (Ultrasound imaging)
- DCS control intelligent sensor
- Microwave ovens
- Blood pressure monitors
- Teletext terminals
- Calculator
- Electrocardiogram (EKG)
- Wastewater treatment
- Refrigerators
