DSPIC30F3014-20I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3014 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 192 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3014-20I/PT Overview
To save space, it is included in the 44-TQFP package. Surface Mount is used for mounting. Tray is the package that contains it. There is a dsPIC as core processor in this device. Working at -40°C~85°C TA temperature is recommended. Its type of program memory is FLASH. 30 I/Os can be found on it. It has a part number of DSPIC30F3014 that can be used to locate similar components. The position of the device is QUAD at terminal. This circuit consists of 44 terminationals. This electrical component is part of the dsPIC? 30F series. As a result of the 5V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed with 44 pins. According to Surface Mount, it is mounted. There are a total of 44 pins on it. This is a component included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 24kB. At a frequency of 20MHz, it can achieve excellent efficiency. There are 3 timers/counters. Normal operation requires a supply voltage (Vsup) above 4.5V. Using an oscillator type Internal, it operates.
DSPIC30F3014-20I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3014-20I/PT Applications
There are a lot of Microchip Technology DSPIC30F3014-20I/PT Microcontroller applications.
- Food and beverage
- ECG machine
- Torpedo guidance
- Oscilloscopes
- Vacuum cleaners
- Process control devices
- Speed meter
- Tape drives
- Playstation
- Television
