DSPIC30F3014-30I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3014 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F3014-30I/ML Overview
Due to its space-saving qualities, it is available in the 44-VQFN Exposed Pad package. Surface Mount is used for mounting. A package of Tube contains it. There is a dsPIC as core processor in this device. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. There are 30 I/Os on it. It has a base part number of DSPIC30F3014 that can be used to find other components that are comparable. The terminals of this device are located at QUAD. It has 44 terminationals. An electrical component such as this is included in the series dsPIC? 30F. The 5V supply voltage enables high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. There are 44 pins used in the construction of this device. Mounting is performed in accordance with Surface Mount. A total of 44 pins are attached to it. In the subcategory of Digital Signal Processors, this component is included. A device with a memory size of 24kB can store programs and data. It performs extremely well at a frequency of 30MHz. It appears that there are 3 timers/counters in use. A supply voltage (Vsup) above 4.5V is necessary for normal operation. Using an oscillator type Internal, it operates.
DSPIC30F3014-30I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3014-30I/ML Applications
There are a lot of Microchip Technology DSPIC30F3014-30I/ML Microcontroller applications.
- Missile control
- Electromechanical control
- Paper shredders
- Radio
- Accu-check
- Fire detection & safety devices
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Dryers
- Entertainment products
- Digital TVs
