DSPIC30F3014-30I/PT
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3014 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 192 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
DSPIC30F3014-30I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. The way of mounting it is Surface Mount. Package Tray contains it. dsPIC core processor is present on the device. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is FLASH. 30 I/Os are present on the device. It has a part number of DSPIC30F3014 that can be used to locate similar components. QUAD is the position of its terminals on the board. 44 terminationals are present. This electrical component is part of the dsPIC? 30F series. As a result of the 5V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 44 pins are required to construct this device. It is mounted based on the method of Surface Mount. Total number of pins is 44. The component is included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 24kB. The system is highly efficient when working at a frequency of 30MHz. The number of timers and counters is 3. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Using oscillator type Internal makes it work.
DSPIC30F3014-30I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3014-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F3014-30I/PT Microcontroller applications.
- Fire alarms
- Toys
- Binding machines
- Auto-breaking system
- Home appliances
- Mice
- Routers
- Security systems
- Dryers
- Information appliances (networking of household appliances)
