DSPIC30F3014T-30I/PT
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3014 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
DSPIC30F3014T-30I/PT Overview
As a result, it is available in the 44-TQFP package. In this case, it is mounted using the method of Surface Mount. There is a Tape & Reel (TR) package available for it. With a processor of dsPIC cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. It has a type of program memory of FLASH. A total of 30 I/Os are present. In order to find similar components, it has a base part number of DSPIC30F3014. The terminals of this device are located at QUAD. A 44 termination is contained within it. The electrical component is part of the series dsPIC? 30F. High efficiency is possible due to the 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 44 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. A total of 44 pins are attached to it. The component is included in Digital Signal Processors. In the device, there is a memory capacity of 24kB which may be used to store programs and data. It performs extremely well at a frequency of 30MHz. There are 3 timers/counters. The property of ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ is also possessed by it. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. It works with an oscillator type Internal.
DSPIC30F3014T-30I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3014T-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F3014T-30I/PT Microcontroller applications.
- DDC control
- Paper shredders
- Home appliances
- Microwave ovens
- Mice
- Hard drives
- Removable disks
- Playstation
- Television
- Digital cameras
