DSPIC30F4011-20E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Height | 4.9mm |
| Length | 53.2mm |
| Width | 14.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
DSPIC30F4011-20E/P Overview
As a result, it is available in the 40-DIP (0.600, 15.24mm) package. Using Through Hole, it is mounted. Package Tube contains it. Devices with dsPIC core processors are available. Maintain a temperature of -40°C~125°C TA while working. There is FLASH program memory in it. It has a number of 30I/Os. A comparable component can be found by using the base part number DSPIC30F4011. QUAD is the position of its terminals on the board. 44 terminationals are present. This electrical component is part of the dsPIC? 30F series. The supply voltage of 5V allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 40 pins used in the construction of this device. The mounting of this device is carried out following the method of Through Hole. It is equipped with 44 pins in total. In Digital Signal Processors, this component is included. Using the devices' 48kB memory size, you can store programs and data. Using a frequency of 20MHz, it is very efficient. There are currently 5 timers/counters set up on the system. Using oscillator type Internal makes it work.
DSPIC30F4011-20E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F4011-20E/P Applications
There are a lot of Microchip Technology DSPIC30F4011-20E/P Microcontroller applications.
- Medical instruments chromatographs
- Smoke alarms
- Graphic terminals
- Dishwashers
- Oil and gas
- Blenders
- Communication-bluetooth, Wi-Fi, radio
- Washing machine
- Fire alarms
- Robots
