DSPIC30F4011-20E/PT
| Parameters | |
|---|---|
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
DSPIC30F4011-20E/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. Mounted using Surface Mount. This item can be found in package Tray. Device with dsPIC core processor issupported. The temperature should be kept at -40°C~125°C TA while working. Memory type FLASH is used for program memory. 30 I/Os have been provided by the device. Based on its base part number of DSPIC30F4011, other similarly-sized components can be found. QUAD is the location of its terminals. 44 terminationals are present. The electrical component is part of the series dsPIC? 30F. As a result of the 5V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. The structure is constructed from 40 pins. The method of Surface Mount is used to mount it. It is equipped with 44 pins in total. It falls under the category of Digital Signal Processors. In order to store data and programs, the devices have a memory size of 48kB. It is highly efficient when it works at a frequency of 20MHz. 5 timer/counters are present. There is an oscillator type Internal used in this circuit.
DSPIC30F4011-20E/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4011-20E/PT Applications
There are a lot of Microchip Technology DSPIC30F4011-20E/PT Microcontroller applications.
- Blenders
- Nintendo
- Calculator
- Leakage current tester
- Virtual reality VR robots
- Scanners
- Blood pressure monitors
- Communication-bluetooth, Wi-Fi, radio
- Fax machines
- Dialysis machines (performs function of liver)
