DSPIC30F4011-20I/ML
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| ROM (words) | 16384 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Number of ADC Channels | 9 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
DSPIC30F4011-20I/ML Overview
A space-saving advantage is that it is included in the 44-VQFN Exposed Pad package. The way of mounting it is Surface Mount. There is a Tube package available for it. A dsPIC core processor powers the device. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. 30 I/Os have been provided by the device. To find comparable components, use the DSPIC30F4011 base part number. At QUAD, its terminals are located. In this case, there are 44 terminationals. It is a member of the dsPIC? 30F series of electrical components. High efficiency is possible due to the 5V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. For its construction, 44 pins are used. This mount is done in accordance with the method of Surface Mount. There are 44 pins on it. The component is included in Digital Signal Processors. The devices have a maximum memory size of 48kB that can be used to store programs and data. This device achieves excellent efficiency at frequencies of 20MHz. In total, there are 5 timers and counters. The oscillator type Internal is used to operate the device.
DSPIC30F4011-20I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4011-20I/ML Applications
There are a lot of Microchip Technology DSPIC30F4011-20I/ML Microcontroller applications.
- Wastewater treatment
- Calculator
- Air fryers
- Xbox
- Fire alarms
- Light sensing & controlling devices
- Tape drives
- Projectors
- Teletext terminals
- Fax machines
