DSPIC30F4011-20I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 40 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Height | 4.953mm |
| Length | 53.21mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4011-20I/P Overview
There is a 40-DIP (0.600, 15.24mm) package available to save space. Using Through Hole, it is mounted. Package Tube contains it. The device runs in dsPIC core processor. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. There are 30 I/Os on it, which makes it a very simple device. Based on the DSPIC30F4011 base part number, it can be compared with other components. At DUAL, it has its terminals. As far as terminations are concerned, there are 40 terminations present. The dsPIC? 30F series includes this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 40 pins. The mounting of this device is carried out following the method of Through Hole. Total number of pins is 40. In the subcategory of Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 48kB. This device achieves excellent efficiency at frequencies of 20MHz. The number of timers and counters is 5. Using an oscillator type of Internal, it works.
DSPIC30F4011-20I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F4011-20I/P Applications
There are a lot of Microchip Technology DSPIC30F4011-20I/P Microcontroller applications.
- Copiers
- Volt meter
- Blenders
- Light sensing & controlling devices
- Dialysis machines (performs function of liver)
- Gas monitoring systems
- Ipod
- DDC control
- Computer/laptop
- Communication-bluetooth, Wi-Fi, radio
