DSPIC30F4011-20I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| ROM (words) | 16384 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4011-20I/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. Surface Mount is the way to mount it. Tray is the package that contains it. A core processor of dsPIC is present in the device. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 30 I/Os are present on the device. In order to find similar components, it has a base part number of DSPIC30F4011. At QUAD, its terminals are located. 44 terminationals are present. This electrical component is part of the dsPIC? 30F series. The supply voltage of 5V allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 44 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. On it, there are 44 pins. In the subcategory of Digital Signal Processors, this component is included. In the device, there is a memory capacity of 48kB which may be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. It appears that there are 5 timers/counters in use. Internal is the oscillator type it uses.
DSPIC30F4011-20I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4011-20I/PT Applications
There are a lot of Microchip Technology DSPIC30F4011-20I/PT Microcontroller applications.
- Entertainment products
- Ipad
- Smart highways (navigation, traffic control, information monitoring and car service)
- Blood pressure monitors
- Accu-check
- Computers and laptops-video calling, email, blogging
- Binding machines
- Toasters
- Smartphone
- Instrument control
