DSPIC30F4011-30I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 4 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4011-30I/ML Overview
For the purpose of saving space, it is available in the 44-VQFN Exposed Pad package. The way of Surface Mount is used to mount it. In the package Tube, it is included. dsPIC core processor is present on the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. It has a number of 30I/Os. Based on the DSPIC30F4011 base part number, it can be compared with other components. At QUAD, its terminals are located. 44 terminations are present in it. It is a member of the dsPIC? 30F series of electrical components. By using a 5V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed using 44 pins. As a result, it is mounted in accordance with Surface Mount. In total, it has 44 pins. This is a component included in Digital Signal Processors. In the device, there is a memory capacity of 48kB which may be used to store programs and data. At a frequency of 30MHz, it exhibits excellent efficiency. The number of timers and counters is 5. There is an oscillator type Internal used in this circuit.
DSPIC30F4011-30I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4011-30I/ML Applications
There are a lot of Microchip Technology DSPIC30F4011-30I/ML Microcontroller applications.
- Light sensing & controlling devices
- Microwave ovens
- 3D printers
- Gas monitoring systems
- Fire alarms
- Industrial instrumentation devices
- Computer/laptop
- Blenders
- Mobile computers
- Playstation
