DSPIC30F4011-30I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 28 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 4.953mm |
| Length | 53.21mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4011-30I/P Overview
To save space, it is included in the 40-DIP (0.600, 15.24mm) package. A Through Hole mounting method is used. It is available in the Tube package. dsPIC core processor is present on the device. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. There are 30 I/Os on the board. To find comparable components, use the DSPIC30F4011 base part number. The terminals are positioned at DUAL. A 40 termination is contained within it. In the dsPIC? 30F series, this electrical component is found. Because of the 5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 40 pins used in the construction of this device. The method of Through Hole is used to mount it. 28 pins are on it in total. This is a component included in Digital Signal Processors. In the device, there is a memory capacity of 48kB which may be used to store programs and data. The system is highly efficient when working at a frequency of 30MHz. 5 timer/counters are present. It works with an oscillator type Internal.
DSPIC30F4011-30I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F4011-30I/P Applications
There are a lot of Microchip Technology DSPIC30F4011-30I/P Microcontroller applications.
- Accu-check
- Electronic jamming systems
- Ipod
- Graphic terminals
- Embedded gateways
- Smart instruments
- Walkie talkies
- Data acquisition and control
- Automatic staplers
- Guidance-GPS
