DSPIC30F4011T-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4011 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 16384 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DSPIC30F4011T-30I/PT Overview
For space savings, it is available in the 44-TQFP package. It is mounted using the way of Surface Mount. A package of Tape & Reel (TR) contains it. Devices with dsPIC core processors are available. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 30 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number DSPIC30F4011. A QUAD position is assigned to its terminals. A 44 termination is contained within it. This electrical component is part of the dsPIC? 30F series. Because of the 5V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 44 pins used in the construction of this device. The method of Surface Mount is used to mount it. It is equipped with 44 pins in total. Subcategory Digital Signal Processors includes this component. The devices have a memory size of 48kB that can be used to store programs and data. At a frequency of 30MHz, it can achieve excellent efficiency. A total of 5 timers/counters are present. Using an oscillator type of Internal, it works.
DSPIC30F4011T-30I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4011T-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F4011T-30I/PT Microcontroller applications.
- Broadband technology, video and voice processing
- Christmas lights
- Dryers
- Accu-check
- Pacemakers (used to control abnormal heart rhythm)
- Speed meter
- Scanners
- Microwave ovens
- Virtual reality VR robots
- Radio
