Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
28-DIP (0.300, 7.62mm) |
Number of Pins |
28 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2008 |
Series |
dsPIC™ 30F |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
3A991.A.2 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Digital Signal Processors |
Technology |
CMOS |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Frequency |
20MHz |
Base Part Number |
DSPIC30F4012 |
Pin Count |
28 |
Operating Supply Voltage |
5.5V |
Interface |
CAN, I2C, SPI, UART, USART |
Memory Size |
48kB |
Oscillator Type |
Internal |
Number of I/O |
20 |
RAM Size |
2K x 8 |
Voltage - Supply (Vcc/Vdd) |
2.5V~5.5V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Core Processor |
dsPIC |
Peripherals |
Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
16-Bit |
Program Memory Size |
48KB 16K x 24 |
Connectivity |
CANbus, I2C, SPI, UART/USART |
Bit Size |
16 |
Data Converter |
A/D 6x10b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
16b |
PWM Channels |
YES |
DAC Channels |
NO |
Number of Timers/Counters |
5 |
ROM (words) |
16384 |
EEPROM Size |
1K x 8 |
On Chip Program ROM Width |
24 |
Format |
FIXED-POINT |
RAM (words) |
1024 |
Height Seated (Max) |
4.06mm |
Length |
34.67mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
DSPIC30F4012-20E/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. A package of Tube contains it. A core processor of dsPIC is present in the device. Work should be done at -40°C~125°C TA. FLASH is the type of program memory used by it. There are 20 I/Os on it. Based on the DSPIC30F4012 base part number, it can be compared with other components. At DUAL, it has its terminals. 28 terminations are present in it. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 28 pins are used to construct it. It is mounted based on the method of Through Hole. It is equipped with 28 pins in total. In Digital Signal Processors, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 48kB. Using a frequency of 20MHz, it is very efficient. The supply voltage of 5.5V's adaptability can be fully utilised by designers. 5 timers/counters are in use. Using an oscillator type of Internal, it works.
DSPIC30F4012-20E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F4012-20E/SP Applications
There are a lot of Microchip Technology DSPIC30F4012-20E/SP Microcontroller applications.
- Set-top boxes
- Industrial instrumentation devices
- Speed meter
- Xbox
- Tape drives
- Instrument control
- Process control devices
- Safety -airbags, automatic braking system (ABS)
- Heart rate monitors
- Calculators