DSPIC30F4012-20I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4012 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 16384 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F4012-20I/ML Overview
For the purpose of saving space, it is available in the 44-VQFN Exposed Pad package. A Surface Mount mounting method is used. You can find it in the package of Tube. The device runs in dsPIC core processor. Maintain a temperature of -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. There are 20 I/Os on it, which makes it a very simple device. It has a base part number of DSPIC30F4012 that can be used to find other components that are comparable. At QUAD, its terminals are located. As far as terminations are concerned, there are 44 terminations present. The electrical component is part of the series dsPIC? 30F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 44 pins are required to construct this device. According to Surface Mount, it is mounted. There are a total of 44 pins on it. In Digital Signal Processors, this component is included. In order to store data and programs, the devices have a memory size of 48kB. It is highly efficient when it works at a frequency of 20MHz. The number of timers and counters is 5. Using a Internal oscillator type, it works well.
DSPIC30F4012-20I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4012-20I/ML Applications
There are a lot of Microchip Technology DSPIC30F4012-20I/ML Microcontroller applications.
- Digital TVs
- Washing machine
- Smart instruments
- Broadband technology, video and voice processing
- Blenders
- Leakage current tester
- Microwave ovens
- DVD\DV\MP3 players
- Process control devices
- Graphic terminals
