DSPIC30F4012-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4012 |
| Pin Count | 28 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4012-20I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. A Surface Mount mounting method is used. There is a Tube package available for it. There is a dsPIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. 20 I/Os are present on the device. Based on the DSPIC30F4012 base part number, it can be compared with other components. The terminals are positioned at DUAL. 28 terminations are present in it. The electrical component is part of the series dsPIC? 30F. As a result of the 5V supply voltage, high efficiency is possible. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. According to Surface Mount, it is mounted. On it, there are 28 pins. Digital Signal Processors contains this component. Using the devices' 48kB memory size, you can store programs and data. When working at a frequency of 20MHz it is able to achieve excellent efficiency. There are 5 timers/counters. There is an oscillator type Internal used in this circuit.
DSPIC30F4012-20I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4012-20I/SO Applications
There are a lot of Microchip Technology DSPIC30F4012-20I/SO Microcontroller applications.
- Answering machines
- Computed Tomography (CT scan)
- Electronic jamming systems
- Toys
- Keyboards
- Guidance-GPS
- Magnetic resonance imaging (MRI)
- Aerospace navigation systems
- Heater/Fan
- Ipod
