DSPIC30F4012-30I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4012 |
| Pin Count | 44 |
| Operating Supply Voltage | 5.5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4012-30I/ML Overview
Due to its space-saving qualities, it is available in the 44-VQFN Exposed Pad package. The way of Surface Mount is used to mount it. It is available in the Tube package. Device with dsPIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~85°C TA. Its type of program memory is FLASH. 20 I/Os can be found on it. To find equivalent components, use its DSPIC30F4012 base part number. The position of the device is QUAD at terminal. Currently, it consists of 44 terminationals. There are a number of electrical components in the dsPIC? 30F series, including this one. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 44 pins are used in its construction. According to Surface Mount, it is mounted. In total, it has 44 pins. The component is included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 48kB. The system is highly efficient when working at a frequency of 30MHz. A designer is able to make full use of the adaptability and supply voltage of 5.5V by using it. 5 counters/timers are currently active. Internal is the oscillator type it uses.
DSPIC30F4012-30I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4012-30I/ML Applications
There are a lot of Microchip Technology DSPIC30F4012-30I/ML Microcontroller applications.
- DDC control
- Heart rate monitors
- Smart highways (navigation, traffic control, information monitoring and car service)
- Removable disks
- Fire detection & safety devices
- Electronic jamming systems
- Hard drives
- Air fryers
- Data acquisition and control
- Process control devices
