DSPIC30F4012-30I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | DSPIC30F4012 |
| Pin Count | 28 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 6 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4012-30I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. A Through Hole mounting method is used. You can find it in the package of Tube. There is a dsPIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. The device has 20 I/Os. To find comparable components, use the DSPIC30F4012 base part number. The position of the device is DUAL at terminal. A 28 termination is contained within it. This electrical component is part of the dsPIC? 30F series. The supply voltage of 5V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 28 pins are used. The mounting of this device is carried out following the method of Through Hole. In total, it has 28 pins. It falls under the category of Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 48kB. At a frequency of 30MHz, it can achieve excellent efficiency. A total of 5 timers/counters are present. It works with an oscillator type Internal.
DSPIC30F4012-30I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F4012-30I/SP Applications
There are a lot of Microchip Technology DSPIC30F4012-30I/SP Microcontroller applications.
- Calculators
- Instrument control
- Heart rate monitors
- Safety -airbags, automatic braking system (ABS)
- Torpedo guidance
- Entertainment products
- Aerospace navigation systems
- Toys
- Sonography (Ultrasound imaging)
- Computers and laptops-video calling, email, blogging
