DSPIC30F4013-20I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4013 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 16384 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4013-20I/ML Overview
As a result, it is available in the 44-VQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in the package?of a Tube. The device has a dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. It has a type of program memory of FLASH. There are 30 I/Os on it. Other components that are comparable to it have the base part number DSPIC30F4013. At QUAD, it has its terminals. In this case, there are 44 terminationals. dsPIC? 30F is the series number of this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There are 44 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. In total, it has 44 pins. It falls under the category of Digital Signal Processors. A device with a memory size of 48kB can store programs and data. The system is highly efficient when working at a frequency of 20MHz. A total of 5 timers/counters are present. Using an oscillator type Internal, it operates.
DSPIC30F4013-20I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4013-20I/ML Applications
There are a lot of Microchip Technology DSPIC30F4013-20I/ML Microcontroller applications.
- Microwave ovens
- Dishwashers
- Computer/laptop
- Missile control
- Heart rate monitors
- Electromechanical control
- Set-top boxes
- Hand-held metering systems
- Smart instruments
- Hard drives
