DSPIC30F4013-20I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F4013 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 4 |
| Height | 4.9mm |
| Length | 53.2mm |
| Width | 14.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4013-20I/P Overview
There is an option to purchase it in the 40-DIP (0.600, 15.24mm) package, which saves space. It is mounted using the way of Through Hole. A package of Tube contains it. The device runs in dsPIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 30I/Os. It has a base part number of DSPIC30F4013 that can be used to find other components that are comparable. This device has terminals at DUAL. It has 40 terminationals. In the dsPIC? 30F series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 40 pins. During the mounting process, the device is mounted based on the Through Hole method. In total, it has 40 pins. This component is a part of Digital Signal Processors. The devices have a maximum memory size of 48kB that can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. When 5V is employed, designers can fully utilize its adaptability and supply voltage. There are 5 timers/counters. Internal is the oscillator type it uses.
DSPIC30F4013-20I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F4013-20I/P Applications
There are a lot of Microchip Technology DSPIC30F4013-20I/P Microcontroller applications.
- Projectors
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Wastewater treatment
- DDC control
- Gas monitoring systems
- Home appliances
- Hard drives
- Computer/laptop
- Routers
- Auto-breaking system
