DSPIC30F4013-20I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4013 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4013-20I/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. Surface Mount is used for mounting. In the package Tray, it is included. The device runs in dsPIC core processor. The temperature should be kept at -40°C~85°C TA while working. There is FLASH program memory in it. A total of 30 I/Os are present. Based on the DSPIC30F4013 base part number, it can be compared with other components. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 44 terminations present. It is a member of the dsPIC? 30F series of electrical components. High efficiency is possible due to the 5V supply voltage. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 44 pins are required to construct this device. It is mounted based on the method of Surface Mount. There are a total of 44 pins on it. It belongs to the subcategory Digital Signal Processors. In the device, there is a memory capacity of 48kB which may be used to store programs and data. It performs extremely well at a frequency of 20MHz. 5 counters/timers are currently active. Using an oscillator type of Internal, it works.
DSPIC30F4013-20I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4013-20I/PT Applications
There are a lot of Microchip Technology DSPIC30F4013-20I/PT Microcontroller applications.
- Toasters
- Switches
- Accu-check
- Auto-breaking system
- Guidance-GPS
- Torpedo guidance
- DDC control
- Aerospace navigation systems
- Smoke alarms
- Equipment control
