DSPIC30F4013-30I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | DSPIC30F4013 |
| Pin Count | 40 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 4 |
| Height | 4.953mm |
| Length | 53.21mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4013-30I/P Overview
Due to the benefits of saving space, it is available in the 40-DIP (0.600, 15.24mm) package. Mounted using Through Hole. There is a Tube package available for it. The device runs in dsPIC core processor. The temperature should be kept at -40°C~85°C TA while working. The type of memory it uses is FLASH. It has a number of 30I/Os. Based on the DSPIC30F4013 base part number, it can be compared with other components. At DUAL, its terminals are located. 40 terminations are present in it. dsPIC? 30F is the series number of this electrical component. As a result of the 5V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed using 40 pins. It is mounted based on the method of Through Hole. In total, it has 40 pins. Subcategory Digital Signal Processors includes this component. In the device, there is a memory capacity of 48kB which may be used to store programs and data. When working at a frequency of 30MHz it is able to achieve excellent efficiency. The number of timers and counters is 5. It works with an oscillator type Internal.
DSPIC30F4013-30I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F4013-30I/P Applications
There are a lot of Microchip Technology DSPIC30F4013-30I/P Microcontroller applications.
- Playstation
- Electromechanical control
- Industrial instrumentation devices
- DCS control intelligent sensor
- Torpedo guidance
- DDC control
- Oscilloscopes
- Equipment control
- Hard drives
- Magnetic resonance imaging (MRI)
