DSPIC30F4013-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F4013 |
| Pin Count | 44 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 48KB 16K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 384 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of UART Channels | 2 |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 4 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F4013-30I/PT Overview
For space savings, it is available in the 44-TQFP package. Mounted using Surface Mount. It comes in a Tray package. The device has a dsPIC core processor. Work should be done at -40°C~85°C TA. FLASH is its program memory type. It has a number of 30I/Os. In order to find similar components, it has a base part number of DSPIC30F4013. The position of the device is QUAD at terminal. There are a total of 44 terminations in it. The dsPIC? 30F series contains this electrical component. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 44 pins are used to construct it. A method of mounting is used, which is Surface Mount. It is equipped with 44 pins in total. The component is included in Digital Signal Processors. In order to store data and programs, the devices have a memory size of 48kB. Working at a frequency of 30MHz results in excellent efficiency. The number of timers and counters is 5. The oscillator type Internal is used to operate the device.
DSPIC30F4013-30I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F4013-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F4013-30I/PT Microcontroller applications.
- Medical instruments chromatographs
- Hard drives
- DDC control
- Smart instruments
- Graphic terminals
- Pacemakers (used to control abnormal heart rhythm)
- Nintendo
- Projector
- Air fryers
- Information appliances (networking of household appliances)
