DSPIC30F5011-20I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5011 |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 66kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 528 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5011-20I/PT Overview
To save space, it is included in the 64-TQFP package. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. A core processor of dsPIC is present in the device. Maintain a temperature of -40°C~85°C TA while working. Its type of program memory is FLASH. 52 I/Os are present on the device. To find comparable components, use the DSPIC30F5011 base part number. The position of the device is QUAD at terminal. As far as terminations are concerned, there are 64 terminations present. The dsPIC? 30F series includes this electrical component. The supply voltage of 5V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 64 pins are used to construct it. The method of Surface Mount is used to mount it. A total of 64 pins are attached to it. Digital Signal Processors contains this component. In order to store data and programs, the devices have a memory size of 66kB. At a frequency of 20MHz, it exhibits excellent efficiency. There are 5 timers/counters. An oscillator of type Internal is used.
DSPIC30F5011-20I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5011-20I/PT Applications
There are a lot of Microchip Technology DSPIC30F5011-20I/PT Microcontroller applications.
- Automatic control
- Automatic staplers
- Answering machines
- 3D printers
- Laminators
- Playstation
- Coffee machines
- Blenders
- Equipment control
- Microwave ovens
