DSPIC30F5011-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5011 |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 96kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 528 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of SPI Channels | 2 |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5011-30I/PT Overview
For space savings, it is available in the 64-TQFP package. Surface Mount is the way to mount it. This item can be found in package Tray. A dsPIC core processor powers the device. When working, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 52 I/Os are present. It has a part number of DSPIC30F5011 that can be used to locate similar components. The terminals of this device are located at QUAD. Currently, it consists of 64 terminationals. dsPIC? 30F is the series number of this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. It is constructed with 64 pins. During the mounting process, the device is mounted based on the Surface Mount method. This device has a total of 64 pins. It belongs to the subcategory Digital Signal Processors. A device with a memory size of 96kB can store programs and data. Working at a frequency of 30MHz results in excellent efficiency. There are currently 5 timers/counters set up on the system. The oscillator type Internal is used to operate the device.
DSPIC30F5011-30I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5011-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F5011-30I/PT Microcontroller applications.
- Xbox
- Glucose monitoring systems (for Type 1 Diabetes)
- Industrial robot
- Accu-check
- X-ray
- Wastewater treatment
- Automatic control
- Pacemakers (used to control abnormal heart rhythm)
- DCS control intelligent sensor
- Fax machines
