DSPIC30F5011T-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5011 |
| Pin Count | 64 |
| Operating Supply Voltage | 5.5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 96kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5011T-30I/PT Overview
As a result, it is available in the 64-TQFP package. Surface Mount is used for mounting. You can find it in the package of Tape & Reel (TR). Devices with dsPIC core processors are available. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 52 I/Os on it. It has a base part number of DSPIC30F5011 that can be used to find other components that are comparable. At QUAD, its terminals are located. 64 terminationals are present. This electrical component is part of the dsPIC? 30F series. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed with 64 pins. This mount is done in accordance with the method of Surface Mount. There are 64 pins on it. Digital Signal Processors contains this component. The devices have a maximum memory size of 96kB that can be used to store programs and data. It performs extremely well at a frequency of 30MHz. When 5.5V is employed, designers can fully utilize its adaptability and supply voltage. 5 timer/counters are present. An oscillator of type Internal is used.
DSPIC30F5011T-30I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5011T-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F5011T-30I/PT Microcontroller applications.
- Computer/laptop
- Calculator
- Printers
- Keyboards
- Safety -airbags, automatic braking system (ABS)
- Current meter
- Computed Tomography (CT scan)
- Embedded gateways
- Automatic staplers
- Digital set-top boxes
