DSPIC30F5013-20I/PT
| Parameters | |
|---|---|
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 66kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 528 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5013 |
| Pin Count | 80 |
| Operating Supply Voltage | 5.5V |
DSPIC30F5013-20I/PT Overview
For the purpose of saving space, it is available in the 80-TQFP package. This is mounted using the Surface Mount method. Package Tray contains it. With a processor of dsPIC cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. It has a number of 68I/Os. Based on the DSPIC30F5013 base part number, it can be compared with other components. This device has terminals at QUAD. 80 terminationals are present. dsPIC? 30F is the series number of this electrical component. The supply voltage of 5V allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed with 80 pins. The mounting of this device is carried out following the method of Surface Mount. A total of 80 pins are attached to it. The component is included in Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 66kB. It is highly efficient when it works at a frequency of 20MHz. A designer is able to make full use of the adaptability and supply voltage of 5.5V by using it. 5 timer/counters are present. An oscillator of type Internal is used.
DSPIC30F5013-20I/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5013-20I/PT Applications
There are a lot of Microchip Technology DSPIC30F5013-20I/PT Microcontroller applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Automatic control
- Calculators
- Ipod
- Current meter
- Wastewater treatment
- Toasters
- Hand-held metering systems
- Tape drives
- Electronic jamming systems
