DSPIC30F5013T-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5013 |
| Pin Count | 80 |
| Operating Supply Voltage | 5.5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 66kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5013T-30I/PT Overview
For space savings, it is available in the 80-TQFP package. Mounted using Surface Mount. There is a Tape & Reel (TR) package available for it. dsPIC core processor is present on the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. 68 I/Os are present on the device. It has a base part number of DSPIC30F5013 that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. This circuit consists of 80 terminationals. The dsPIC? 30F series contains this electrical component. The supply voltage of 3.3V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 80 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. On it, there are 80 pins. Digital Signal Processors contains this component. A device with a memory size of 66kB can store programs and data. Using a frequency of 30MHz, it is very efficient. While deploying 5.5V, designers will be able to fully take advantage of its adaptability. A total of 5 timers/counters have been set up. An oscillator type Internal is required for it to work.
DSPIC30F5013T-30I/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5013T-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F5013T-30I/PT Microcontroller applications.
- Oscilloscopes
- Industrial instrumentation devices
- Guidance-GPS
- Process control devices
- Digital set-top boxes
- Set-top boxes
- Entertainment products
- Virtual reality VR robots
- Binding machines
- Smartphone
