DSPIC30F5015-20E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5015 |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 66kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5015-20E/PT Overview
There is a 64-TQFP package available to save space. Using Surface Mount, it is mounted. Package Tray contains it. The device runs in dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. 52 I/Os have been provided by the device. A comparable component can be found by using the base part number DSPIC30F5015. The position of the device is QUAD at terminal. 64 terminationals are present. There are a number of electrical components in the dsPIC? 30F series, including this one. Because the supply voltage is 5V, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. The structure is composed of 64 pins. The mounting of this device is carried out following the method of Surface Mount. On it, there are 64 pins. The component is included in Digital Signal Processors. A device with a memory size of 66kB can store programs and data. It performs extremely well at a frequency of 20MHz. A total of 5 timers/counters are present. An oscillator of type Internal is used.
DSPIC30F5015-20E/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5015-20E/PT Applications
There are a lot of Microchip Technology DSPIC30F5015-20E/PT Microcontroller applications.
- Radio
- Auto-breaking system
- Fabric
- Graphic terminals
- Heart rate monitors
- Set-top boxes
- Process control devices
- Fire detection & safety devices
- Current meter
- Air fryers
