DSPIC30F5015-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5015 |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 66kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 528 kb |
| EEPROM Size | 1K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 9.9822mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5015-30I/PT Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. It is mounted using the way of Surface Mount. It is available in the Tray package. dsPIC core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. In terms of its program memory type, it is FLASH. 52 I/Os have been provided by the device. A comparable component can be found by using the base part number DSPIC30F5015. The terminals of this device are located at QUAD. In this case, there are 64 terminationals. An electrical component such as this is included in the series dsPIC? 30F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 64 pins are used. A method of mounting is used, which is Surface Mount. There are 64 pins on it. This is a component included in Digital Signal Processors. A device with a memory size of 66kB can store programs and data. When working at a frequency of 30MHz it is able to achieve excellent efficiency. It appears that there are 5 timers/counters in use. An oscillator of type Internal is used.
DSPIC30F5015-30I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5015-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F5015-30I/PT Microcontroller applications.
- Ipad
- Medical instruments chromatographs
- Washing machine
- Fire detection & safety devices
- DCS control intelligent sensor
- Multi-meter
- Missile control
- Telephone sets
- Fabric
- Kindle
