DSPIC30F5015T-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5015 |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 66kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5015T-30I/PT Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. A Surface Mount mounting method is used. In the package Tape & Reel (TR), it is included. There is a dsPIC as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. Its type of program memory is FLASH. A total of 52 I/Os are available on this device. A component with the same part number as DSPIC30F5015 can be compared to other similar components. The position of the device is QUAD at terminal. There are a total of 64 terminations in it. An electrical component such as this is included in the series dsPIC? 30F. The supply voltage of 3V allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 64 pins are used to construct it. According to Surface Mount, it is mounted. Total number of pins is 64. It is one of the components included in Digital Signal Processors. In order to store data and programs, the devices have a memory size of 66kB. This device works well at 30MHz frequency when it is operating at a high rate of efficiency. A total of 5 timers/counters have been set up. Using an oscillator type of Internal, it works.
DSPIC30F5015T-30I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5015T-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F5015T-30I/PT Microcontroller applications.
- Digital set-top boxes
- Volt meter
- Entertainment products
- Christmas lights
- Teletext terminals
- Toasters
- Microwave ovens
- Vacuum cleaners
- Xbox
- Missile control
