DSPIC30F6010A-30I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6010A |
| Pin Count | 80 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| Nominal Supply Current | 84mA |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of SPI Channels | 2 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6010A-30I/PF Overview
A space-saving advantage is that it is included in the 80-TQFP package. Surface Mount is the way to mount it. Tray is the package that contains it. It is equipped with a dsPIC core processor. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. A total of 68 I/Os are present. It has a part number of DSPIC30F6010A that can be used to locate similar components. This device has terminals at QUAD. As far as terminations are concerned, there are 80 terminations present. There are a number of electrical components in the dsPIC? 30F series, including this one. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 80 pins are used. This mount is done in accordance with the method of Surface Mount. It is equipped with 80 pins in total. It is one of the components included in Digital Signal Processors. Memory size for the devices is 144kB, which can be used to store programs and data. The system is highly efficient when working at a frequency of 30MHz. The number of timers and counters is 5. Internal is the oscillator type it uses.
DSPIC30F6010A-30I/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6010A-30I/PF Applications
There are a lot of Microchip Technology DSPIC30F6010A-30I/PF Microcontroller applications.
- Toasters
- Smoke alarms
- Sonography (Ultrasound imaging)
- Robots
- Projector
- Smartphone
- Robotic prosthetic limbs
- Radio
- Food and beverage
- Guidance-GPS
