DSPIC30F6011-20I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6011 |
| Pin Count | 64 |
| Lead Pitch | 650μm |
| Row Spacing | 16 mm |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 3072 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6011-20I/PF Overview
It is available in the 64-TQFP package for the benefit of saving space. Surface Mount is used for mounting. There is a Tray package available for it. The device runs in dsPIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. There are 52 I/Os on the board. Other components that are comparable to it have the base part number DSPIC30F6011. The terminals of this device are located at QUAD. 64 terminationals are present. The dsPIC? 30F series includes this electrical component. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed using 64 pins. It is equipped with 64 pins in total. Digital Signal Processors contains this component. The devices have a maximum memory size of 132kB that can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 5 timer/counters are present. Using an oscillator type Internal, it operates.
DSPIC30F6011-20I/PF Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6011-20I/PF Applications
There are a lot of Microchip Technology DSPIC30F6011-20I/PF Microcontroller applications.
- Embedded gateways
- Microwave ovens
- Calculator
- Security systems
- Home appliances
- Printers
- DCS control intelligent sensor
- Robotic prosthetic limbs
- Smart highways (navigation, traffic control, information monitoring and car service)
- Wastewater treatment
