DSPIC30F6011-30I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6011 |
| Pin Count | 64 |
| Lead Pitch | 650μm |
| Row Spacing | 16 mm |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 3072 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC30F6011-30I/PF Overview
For the purpose of saving space, it is available in the 64-TQFP package. Using Surface Mount, it is mounted. There is a Tray package available for it. Devices with dsPIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. A total of 52 I/Os are present. A component with the same part number as DSPIC30F6011 can be compared to other similar components. QUAD is the position of its terminals on the board. 64 terminations are present in it. It is a member of the dsPIC? 30F series of electrical components. By using a 5V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 64 pins are used to construct it. A total of 64 pins are attached to it. This component is a part of Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 132kB. The system is highly efficient when working at a frequency of 30MHz. 5 timers/counters are in use. Internal is the oscillator type it uses.
DSPIC30F6011-30I/PF Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6011-30I/PF Applications
There are a lot of Microchip Technology DSPIC30F6011-30I/PF Microcontroller applications.
- Toasters
- Speed meter
- Electromechanical control
- Temperature sensing and controlling devices
- Removable disks
- Keyboards
- Calculators
- Virtual reality VR robots
- 3D printers
- Torpedo guidance
