DSPIC30F6011A-20E/PF
| Parameters | |
|---|---|
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6011A |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Supply Current-Max | 180mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 6144 |
| Height Seated (Max) | 1.2mm |
DSPIC30F6011A-20E/PF Overview
To save space, it is included in the 64-TQFP package. Surface Mount is the way to mount it. It is available in the Tray package. The device runs in dsPIC core processor. Work should be done at -40°C~125°C TA. FLASH is the type of program memory used by it. 52 I/Os have been provided by the device. A component with the same part number as DSPIC30F6011A can be compared to other similar components. The position of the device is QUAD at terminal. In this case, there are 64 terminationals. The electrical component is part of the series dsPIC? 30F. Because of the 5V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. The structure is composed of 64 pins. This mount is done in accordance with the method of Surface Mount. This device has a total of 64 pins. It is one of the components included in Digital Signal Processors. The devices have a memory size of 132kB that can be used to store programs and data. It is important to note that the maximum supply current is 180mA. It is highly efficient when it works at a frequency of 20MHz. 5 counters/timers are currently active. Using an oscillator type Internal, it operates.
DSPIC30F6011A-20E/PF Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6011A-20E/PF Applications
There are a lot of Microchip Technology DSPIC30F6011A-20E/PF Microcontroller applications.
- Fax machines
- Torpedo guidance
- Digital set-top boxes
- Equipment control
- Switches
- X-ray
- Ipad
- Fire alarms
- Digital cameras
- Nintendo
