DSPIC30F6011A-20E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6011A |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| EEPROM Size | 2K x 8 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6011A-20E/PT Overview
For the purpose of saving space, it is available in the 64-TQFP package. Using Surface Mount, it is mounted. This item can be found in package Tray. A dsPIC core processor powers the device. Working at -40°C~125°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. 52 I/Os have been provided by the device. Based on the DSPIC30F6011A base part number, it can be compared with other components. The position of the device is QUAD at terminal. There are a total of 64 terminations in it. It is a member of the dsPIC? 30F series of electrical components. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 64 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. It is equipped with 64 pins in total. In the subcategory of Digital Signal Processors, this component is included. In the device, there is a memory capacity of 132kB which may be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. There are 5 timers/counters. Using a Internal oscillator type, it works well.
DSPIC30F6011A-20E/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6011A-20E/PT Applications
There are a lot of Microchip Technology DSPIC30F6011A-20E/PT Microcontroller applications.
- Mobile computers
- Walkie talkies
- Hard drives
- Auto-breaking system
- Dialysis machines (performs function of liver)
- Smart instruments
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Paper shredders
- Nintendo
- Fire alarms
