DSPIC30F6011A-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6011A |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| EEPROM Size | 2K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6011A-30I/PT Overview
A space-saving advantage is that it is included in the 64-TQFP package. Surface Mount is the way to mount it. It comes in a Tray package. dsPIC core processor is present on the device. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 52 I/Os on it. A component with the same part number as DSPIC30F6011A can be compared to other similar components. QUAD is the position of its terminals on the board. This circuit consists of 64 terminationals. An electrical component such as this is included in the series dsPIC? 30F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. 64 pins are used to construct it. It is mounted based on the method of Surface Mount. It has a total of 64 pins on it. In Digital Signal Processors, this component is included. Data and programs can be stored on the devices with a memory size of 132kB. It is highly efficient when it works at a frequency of 30MHz. 5 timer/counters are present. There is an oscillator type Internal used in this circuit.
DSPIC30F6011A-30I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6011A-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F6011A-30I/PT Microcontroller applications.
- Coffee machines
- Automatic control
- Washing machine
- Paper shredders
- Answering machines
- Switches
- Walkie talkies
- Radio
- Instrument control
- Computers and laptops-video calling, email, blogging
